Guide · Homeowners and landlords · 3 min read · Updated 16 November 2026
Sewage Backflow and Flood Water Clean-Up: What Needs Decontamination
Short answer
Sewage and contaminated flood water carry bacteria and viruses, so affected areas need decontamination, not just drying. Keep people and pets away, switch off electrics if water has reached sockets, and photograph damage for insurance. Porous items such as carpets, underlay and soaked plasterboard usually have to be removed. Hard surfaces are cleaned and disinfected before drying out.
Why sewage water is different
Water from a burst clean-water pipe is unpleasant but relatively low risk if dried quickly. Sewage from a blocked drain or backflowing toilet, and flood water that has passed through drains or over farmland, is different. It can carry bacteria, viruses and parasites that cause stomach illness and infections, and it leaves contaminated residue on everything it touches.
This is why sewage and contaminated flood water need a decontamination clean. Simply mopping up and running a fan dries the surface but leaves contamination in floor coverings, skirting, plasterboard and the gaps between floorboards.
First steps
Do not use a household vacuum on sewage water, and avoid walking contamination through the rest of the house.
- Keep children, pets and anyone with a weakened immune system away from the affected area.
- If water has reached electrical sockets or appliances, turn off the electricity at the consumer unit only if it is safe to do so, and get an electrician to check before turning it back on.
- Find and stop the source if you can, such as not using toilets or sinks connected to a blocked drain.
- Report a blocked public sewer to your water company; drains serving only your property are usually your responsibility.
- Photograph and video the damage before anything is removed, for your insurer.
- Contact your insurer early, as many policies have specific steps and approved contractors.
What can be saved and what has to go
The general principle is that porous materials soaked in sewage are very difficult to decontaminate, while hard, non-porous materials can be cleaned and disinfected. Insurers and contractors usually follow this approach when deciding what to remove.
| Item | Usually | Why |
|---|---|---|
| Carpet and underlay | Removed and disposed of | Contamination soaks right through |
| Plasterboard soaked from below | Cut out above the water line | Absorbs water and contamination |
| Upholstered furniture | Usually disposed of | Filling cannot be reliably decontaminated |
| Tiled and sealed hard floors | Cleaned and disinfected | Non-porous surface |
| Solid timber and skirting | Assessed case by case | May be cleaned if not badly soaked |
| Food and toiletries exposed to water | Thrown away | Risk of contamination |
How a professional decontamination works
The team removes standing water with pumps or wet vacuums, strips out contaminated porous materials, and bags them for disposal as appropriate waste. Hard surfaces are cleaned to remove residue and then treated with a disinfectant suitable for sewage contamination, left for the contact time on the product label. Only then does drying begin, often with dehumidifiers and air movers, while moisture levels are monitored.
Drying a property properly can take days to weeks, depending on how much water got into the structure. Redecorating or refitting before the structure is dry can trap moisture and lead to mould, so a reputable contractor will measure and record moisture levels before signing off.
Preventing a repeat
Many sewage backflows are caused by blockages from fat, oil and grease poured down sinks, and from wet wipes, sanitary products and nappies flushed down toilets. These build up in drains and sewers until waste water has nowhere to go but back up. Only flush toilet paper and human waste, and wipe greasy pans with kitchen roll before washing them.
Properties at the bottom of a slope or with basements and low-level toilets are more vulnerable when sewers become overloaded during heavy rain. A non-return valve, sometimes called an anti-flood valve, fitted to the drain can stop sewage flowing back into the property. These should be specified and fitted by a qualified drainage contractor, and some water companies offer advice or schemes for properties that flood repeatedly.
Have the drains surveyed with a CCTV camera if you have had more than one blockage. A survey shows root intrusion, collapsed pipes or poor falls that cause repeated problems, so they can be repaired rather than just unblocked each time. Keep the survey report with your property records, as insurers may ask about previous incidents.
Insurance and paperwork
Most buildings and contents insurance policies cover escape of water and flooding, but sewage backflow may be treated differently depending on the cause. Tell your insurer straight away and keep receipts for emergency work. Keep the contractor's report describing what was removed, how the area was treated and the moisture readings, as insurers often ask for this.
If you are a landlord, move tenants out of affected areas until decontamination is complete, and keep records of the work. Living conditions after a sewage leak can be a health hazard, so prompt, documented action matters.
Costs
Costs vary widely with the area affected and how much material has to be removed. Small bodily fluid and contamination clean-ups start from around £250, while infection control disinfection of a room or area starts from around £180. A larger sewage clean-up with strip-out and drying is quoted after an inspection. Ask for a fixed price for the decontamination and a separate price for drying if the insurer wants them itemised.
Questions people also ask
Can I clean up sewage myself?
Small amounts on a hard floor can be cleaned by a healthy adult wearing gloves, eye protection and old clothes, using a suitable disinfectant. Larger spills, sewage in carpets or under floors, and anything affecting children or vulnerable people are better handled by a professional decontamination team.
Who is responsible for a sewage backflow?
It depends where the blockage is. Public sewers are the responsibility of the water company, which you should contact if you suspect a sewer problem. Drains serving only your property are usually your responsibility. Your insurer can advise on cover for the clean-up.
How long after a sewage leak is it safe to go back in?
Once contaminated materials are removed and hard surfaces are cleaned and disinfected, the area is generally safe for normal use, although drying may continue for some time. Your contractor should confirm when decontamination is complete.
Written and checked by the Decontamination Cleaning team. Read our editorial policy.
More guides
How Much Does Decontamination Cleaning Cost in the UK?
A small, contained bodily fluid clean-up in the UK costs from about £250. Unattended death and trauma cleans range from £600 to £3,500, depending on…
What Happens During an Unattended Death Clean?
An unattended death clean begins once the police or coroner release the property. Trained technicians assess the scene, set up controls and wear full…
Biohazard Waste Disposal Rules in the UK Explained
In the UK, waste contaminated with blood or bodily fluids from decontamination jobs is generally treated as clinical or hazardous waste. In England…
Found a Needle? What to Do About Discarded Sharps
If you find a discarded needle, do not touch it with bare hands, do not try to recap or break it, and keep children and pets away. Many councils…
How to Choose a Decontamination or Trauma Cleaning Company
Choose a decontamination company that can show training in biohazard work, uses full PPE and approved disinfectants, holds or uses a registered waste…
Pigeon Droppings Removal: Health Risks and Safe Clean-Up
Pigeon droppings can carry bacteria and fungi linked to illnesses such as psittacosis and cryptococcosis, and dried droppings release dust when…
Get a free decontamination cleaning quote
Tell us what you need and we'll come back with a clear price.
Request a quote